TRANSFER WARE-CL TRANSFER PAPER FOR HARD SURFACES 8.5x11" 200 SHEETS-free standard p&p to ireland.

 Can be used for Laser-coated mugs,magnetic ,metal and license plates.

For Laser printers only,will not work on ink jet printers.

For use in mug press or commercial heat press(license plates!)
200 SHEETS.-8.5"x11".

Full instructions included for laser-coated mug printing,and magnetic,metal and license plate printing.

Instructions:
PRINTING LASER-COATED MUGS:
set mug press to 250'f for 80 seconds with medium pressure(60-80 psi)
use thin gray rubber pad for even pressure.
Enlarge or reduce image to the size required,or to fit the mug.
trim transfer,leaving a small non-printed border.

Place mug into press and press at the above settings.let cool and peel
(a bucket of cold water may be used to speed up the cooling process)

To ensure dishwasher safety,place mug in a glazing unit.

FOR MAGNETIC,METAL AND LICENSE PLATES:
Set heat press to 350'f-375'f and medium pressure(60-80 psi)
Enlarge or reduce image as needed for individual product.
do not trim transfer.try to center image before printing.
place product on platen to heat press.
place the entire transfer sheet over the product,printed side down.
put a rubber pressing pad over the transfer paper and press at the above settings for 2 minutes.
Let cool and peel.